What is the red dot on motorcycle tires?

Motorcyclists should wear full-coverage DOT-approved helmets for the best protection. Motorcycle gloves, long-sleeved clothing made from abrasive-resistant materials, and boots that cover the ankle should also be standard equipment according to the Motorcycle Safety Foundation (MSF).

Why is there a red dot on my tire?

The red dot indicates the tire’s high point. Most of the time, a wheel will also have a dot—either a drilled dot or a sticker to indicate its low point. If you have these marks, you should align the red dot with the mark on the wheel. By doing this, you minimize the vibration caused by the high point of the tire.

How do you read a dot on a motorcycle tire?

Look on the outer sidewall for the acronym “DOT,” which should be followed by a series of numbers. The last four digits are what you need to determine when the tire was manufactured. The first two numbers represent the week, and the second pair indicates the year.

What does 72h mean on a motorcycle tire?

The letters (H) represent the speed rating of the tire. In this case, H means a top speed of 130 miles per hour. A typical speed chart will show J or 62mph all the way to W which is 168mph. Now… sometimes we will see a ZR in the tire size and then a different Load Rating / Speed Index label to follow.

IT IS IMPORTANT:  Can I ride a motorcycle on a car Licence in UK?

How long are motorcycle tires safe?

Experts suggest that tires last for around 5 years, after which you must consider replacing them. This is arguably the most valuable motorcycle safety advice; old, worn-out tires significantly affect the performance and traction level of your bike on the road, making it dangerous to ride.

What does B mean on motorcycle tires?

This is identifying the manner in which the tire was constructed, radial, bias belted, or standard bias/cross ply. Obviously, “R” stands for radial and the “B” stands for bias-belted. If there is no letter between the aspect ratio and rim size that means the tire is just a standard bias ply tire/cross ply tire.

What does MT stand for on motorcycle tires?

MT90S-16. M = motorcycle tire. T = width. 90 = aspect ratio (cross-section height is 90% of width)

What does MT mean on motorcycle tires?

The most obvious piece of information is the big numbers and letters that usually look like this – 130/90 17, or MT90 17. These numbers are a metric designation that indicates the size of the tire and the rim that tyre is designed to go on.

Do I need to balance motorcycle tires?

Do you have to balance a motorcycle tire? Motorcycle tires should be balanced at all times to keep drivers safe. A set of unbalance wheel will affect the motorcycle’s performance and might lead to an accident when neglected. Keeping your motorcycle tires balanced will also help keep them longer.

How long do motorcycle tubes last?

I do have to inflate them after a few months in storage but they do hold enough for a month or two. An inner tube, inside a bike tire and not exposed to high levels of ozone or petroleum fumes (or UV light), can easily last 10-20 years. I just went for a ride today on a bike with tubes at least 8 years old.

IT IS IMPORTANT:  How long do motorcycle rotors last?

Are 10 year old motorcycle Tyres safe?

We recommend replacing any tyres that are more than ten years past the date they were made, but advise against buying or running used tyres that have an unknown history.