How do you paint motorcycle fairings with spray paint?

Can you spray paint motorcycle fairings?

Motorcycle fairings are those plastic shells placed over the frame of the bike to reduce air drag. … Fortunately, even if you’ve never painted fairings before, the process is pretty easy! All you need is sandpaper, primer, and spray paint in order to clean, prep, and finally paint your motorcycle fairings.

Can you paint a motorcycle with spray paint?

A new coat of paint can make a motorcycle look like a different machine. There is no need for a compressor, a spray booth or a spray gun. … With just aerosol motorcycle paint you can create a quality look for your next project and have the chance to do it yourself.

How do you paint plastic motorcycle fairings?

How to Paint Plastic Fairings

  1. Sand the plastic fairings. It’s important to have an appropriate surface for primer and paint to adhere to. …
  2. Prime the surface of the fairings. …
  3. Apply a very thin coat of your base color. …
  4. Wet sand over the thin layer of color. …
  5. Apply the base color coat. …
  6. Apply a clear lacquer coat.
IT IS IMPORTANT:  You asked: What can a driver do to protect a motorcyclist?

What kind of paint do you use on plastic fairings?

To answer your question directly, you want to use grey aluminum oxide primer, a proper base coat, color, and clear not to mention the proper catalysts and reducers for each. Fairings take a lot of abuse and special steps have to be taken before the painting begins.

How do you paint race fairings?

Spray paint over the motorcycle fairings quickly 3 to 5 coats, leaving a drying interval after each coat of paint like three hours per coat. 3. Sand down the fairings again after drying of last coat, wipe the surface of the fairings to remove residual paint particles before application of final paint.

Can you paint motorbike plastics?

When it comes to freshening up small plastic parts on your bike, you don’t need a professional set-up to get a professional finish. Whether cracked, worn, peeling or faded, a fresh coat of paint is a quick and easy way to freshen up tired pieces on your bike.

Can I paint plastic without sanding?

Plastic is nonporous and removing its shiny surface will help your paint to adhere. Use a soft, clean brush or cloth to remove all dust from the sanding process. Paint your item: Once your object’s surface is completely clean and dry, block off areas you don’t want painted with painter’s tape.

How do you Respray plastic?

In five steps or less, quickly update plastic surfaces to better reflect your personal style:

  1. Clean project surface.
  2. Lightly sand surface if previously painted.
  3. Remove dust with a tack cloth.
  4. Let plastic surface dry.
  5. Apply Krylon® Fusion for Plastic® spray paint according to the directions on the spray can label.
IT IS IMPORTANT:  Quick Answer: When driving behind a motorcycle drivers should keep a minimum following distance of at least?

How do you spray paint dirt bike plastic?

Clean the plastic with a Polyvance plastic cleaner. Spray a heavy wet coat; wait about 20 seconds for the solvents to disolve or emulsify any contaminants, then wipe with a clean paper towel. Apply 2 heavy coats of Plastic Magic. Be sure to allow first coat to flash off before applying the second coat.

Is there a primer for plastic?

About Plastic Primer Spray

Rust-Oleum® Specialty Plastic Primer Spray prepares plastic for painting with any top coat. Apply directly to plastic mailboxes, lawn chairs, storage lockers and more. Adheres to hard-to-paint surfaces.

What is the best spray paint for motorcycle?

Best Spray Paints for Motorcycle Gas Tank:

  • Dupli-Color Epae10000 Premium Acrylic Enamel Spray Paint.
  • Rust-Oleum Automotive Engine Enamel Spray Paint.
  • Spraymax 2K Clear.
  • PJ1 Gloss Black Epoxy Spray Paint.
  • POR-15 Top Coat Gloss Black Spray Paint.

How much paint do I need to paint a motorcycle fairing?

Fender: 1-2 12oz Aerosol Spray Can / ½ pint of paint. Saddle bag: 2 12oz Aerosol Spray Cans each / 1 Pint for both. Trunk: 2-3 12oz Aerosol Spray Cans / pint. Fairing Kit: 3 12oz Aerosol Spray Cans minimum / Pint minimum.