Will a power commander fit any bike?

Life Member. Yes, you can move your PCV to the other bike as both bikes use the same one (Part # 15-011). You will however need to go to the Power Commander website and download a new map to the PCV that matches your current setup for the 2012.

Are Power Commanders vehicle specific?

Unfortunately, Power Commander units are not generic or interchangeable between models and vehicles. While they are all packaged in the same enclosure and use a similar style harness, each unit is specifically programmed for the vehicle it was designed to be used with.

Can a Power Commander hurt a motorcycle?

Power Commanders do not harm your bike. They don’t “trick” the OEM ECU. It is nothing more than a piggyback ECU.

How much HP will a power commander add?

The Power Commander is a tuning tool to adjust fuel, and on some models ignition timing. Just adding a Power Commander to a completely stock vehicle usually does not increase peak horsepower. It usually will improve drivability, throttle response, and mid-range horsepower and torque.

Are all Power Commander V the same?

What’s the difference between a Power Commander III and V

They do exactly the same job but the 5 is about half the size of the PC3. However, both maintain, customise and tune your bike’s air to fuel ratio. … It is easier to connect a secondary fuel module and a quick-shifter with a Power Commander V.

IT IS IMPORTANT:  You asked: Can you listen to music while riding a bicycle?

How do I install Power Commander?

How to… fit a power commander

  1. Position the commander. Find somewhere protected from rain and engine heat to mount the power commander. …
  2. Connect to the battery. The power commander has one black 12v connector, which goes onto the black negative battery terminal. …
  3. Connect to the injectors. …
  4. Check and start the bike.

Do you need to dyno tune a power commander?

yes you need a powercommander for a dyno tune. That is what they tune that controls how much fuel is pumped into your engine. You also should install block off plates. It may help with some of the popping as well.

What will a Power Commander do for my bike?

What is a Power Commander? The Power Commander is a fuel injection and, on some models, an ignition timing adjustment unit that plugs ‘inline’ with the bike’s stock ECU (Electronic Control Unit). … Simply removing the Power Commander unit returns the bike to its previous stock condition.

How much is a Power Commander?

Compare with similar items

This item Dynojet (19-001 Power Commander V Fuel Injection Module Dynojet (17-013 Power Commander V Fuel Injection Module
Add to Cart Add to Cart
Customer Rating 5.0 out of 5 stars (1) 5.0 out of 5 stars (1)
Price $39999 $34999
Sold By Racing Performance Racing Performance

Is the Power Commander V bike specific?

Life Member. Yes, you can move your PCV to the other bike as both bikes use the same one (Part # 15-011). You will however need to go to the Power Commander website and download a new map to the PCV that matches your current setup for the 2012.

IT IS IMPORTANT:  Where can I park my bike in Tokyo?

Where can I download Power Commander maps?

To install a map on a Power Commander V fuel tuner, you will need to download the Dynojet Power Commander software using a Windows computer (or a Mac running Windows). Once you install the software, it is easy to download maps from the Dynojet.com website.

What does a Power Commander ignition module do?

The Ignition Module helps raise the rev limit and create timing adjustment. It installs easily to your Power Commander and uses OEM connectors to plug in-line to the stock ignition with no wiring required.