This section is really here to advise against using grease to lubricate your chain. While grease is great for bearings and threads, it won’t penetrate the gaps between the rollers and pins where you really need the lubricant because it’s far too thick. The viscous friction will be much higher too.
Can we use grease on bike chain?
Backpedal a few revolutions, then use a clean rag to wipe off any lube that didn’t work its way into the bearings. It can get messy, so use sparingly. Never Use: Grease—it’s way too heavy for this application, and it will gunk up pulley bearings and attract crud.
Is grease good for chain?
Acids or abrasives in the oil can permanently damage the chain. The chain manufacturer often uses grease or petroleum jelly as an initial lubricant. However, users generally should not apply greases to chains in service because they are too thick to penetrate into the internal bearing surfaces of the chain.
Is it OK to put grease on motorcycle chain?
A squirt of grease can work wonders on these and help prevent pivot wear. Chain lube is fine if you don’t have spray grease. Regular grease will suffice but you should remove the lever first. Changing gear is tougher with a sticky clutch cable, so it’s worth lubing it.
Should I grease or oil bike chain?
If you are a frequent rider, using your bike several times throughout the week, your bicycle will benefit from a regular cleaning and lubrication of the drive chain. Bicycle Tutor recommends cleaning and lubricating your bike’s drive chain at least once every month to maintain optimal performance and protection.
Can I use any grease for my bike?
Most general purpose bike greases seem acceptable but all lack performance data. Alternatively, automotive greases (e.g. Mobil XHP222, Motorex Bike Grease 2000) comply with industrial performance standards. Washout kills bearings, so keep degreasers and power washers away!
What can I use instead of bike grease?
Vegetable oils, such as canola, sesame seed, corn, peanut, cottonseed, linseed, rapeseed, and olive oil, all reduce the amount of friction to very similar levels to those of bike-specific lubricants. Castor oil is a very poor performance bike-lubricant because it is so thick, it’s not able to penetrate the rollers.
How often should I oil my bike chain?
Chain Lube – Part & Parcel Of Cycling
A clean chain is as critical as a properly lubricated one. Ideally, chains should be thoroughly cleaned after each and every ride. Unfortunately not many of us have the time to do this, but even a quick wipe with an clean rag can make a huge difference.
Is coconut oil good for bike chain?
Apart from the wastage of oil while applying( as coconut oil would easily drip down from the chain), the oil would easily evaporate due to frictional heat (I assume it wouldn’t last for more than one ride). While coconut oil would be better than no lubricant, it would damage the chain and spoke if used too often.