Are bike chains different sizes?

Chains come in 3⁄32 in (2.4 mm), 1⁄8 in (3.2 mm), 5⁄32 in (4.0 mm), or 3⁄16 in (4.8 mm) roller widths, the internal width between the inner plates. 1⁄8 in (3.2 mm) chains are typically used on bikes with a single rear sprocket: those with coaster brakes, hub gears, fixed gears such as track bicycles, or BMX bikes.

Are all bike chains the same size?

All modern bicycle chains are made to the “one-half inch pitch” standard, meaning from rivet to rivet is nominally 0.5 inches. … However, this does not mean all makes and models of chains are interchangeable. There are two basic types of bicycle chains: “one-speed” chains, and derailleur chains.

How do I know my bike chain size?

Add the multiplied chainstay length, the divided number of teeth for the chainring and rear sprocket, and add 1 (or 2.5 cm). The result is the ideal chain length for your bike. For example, you’d add 32.5, 13, 7 and 1 to get 53.5. The length of the chain should be 53.5 inches or 135.89 cm.

IT IS IMPORTANT:  Question: What is faster F1 car vs GP bike?

Are 11 and 12 speed chains the same?

This is accomplished by making the outer links of the chain thinner. … Ultimately, single-speed chains are the strongest because they can be very thick since there’s only one cog at the back. The width of a 12-speed chain is roughly 5.25mm whereas that of an 11-speed chain is 5.62mm. That’s a 0.37mm difference.

What is the standard bike chain size?

Chains come in 3⁄32 in (2.4 mm), 1⁄8 in (3.2 mm), 5⁄32 in (4.0 mm), or 3⁄16 in (4.8 mm) roller widths, the internal width between the inner plates. 1⁄8 in (3.2 mm) chains are typically used on bikes with a single rear sprocket: those with coaster brakes, hub gears, fixed gears such as track bicycles, or BMX bikes.

What size chain should I get?

After a measurement is obtained, its a good idea to opt for a necklace size that is at least the second size up from your neck size. For example, if you have an 18 inch neck, you should probably choose a chain length of 20 inches or more. An 18 inch chain would feel too tight.

How do you measure chain size?

To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.

How do you measure the width of a bicycle chain?

It is measured by measuring the distance between 3 links, then dividing it by two.

  1. Chain pitch is shown with green markers, though it is determined by measuring the distance between 3 adjacent pins (blue mark) and dividing it by two.
  2. Inner chain width, marked with blue arrows and lines.
  3. From left to right:
IT IS IMPORTANT:  Best answer: How many bikes does MS Dhoni have?

How much does it cost to replace a chain on a bike?

How much does a bike chain cost to replace? Entry level chains can start off around $15.00 with more expensive and higher performance chains ranging from $25.00 to $60.00 or more. More expensive chains increase shift quality and are generally more durable as they wear.

Can I use 10 speed chain on 11 speed cassette?

Chain width is 5.62 mm.

Since 10 and 11 speed chains are almost the same width, as well as cassette teeth, 10 speed chain can be used in stead of 11 speed one, without it jamming between the sprockets.

Can you put a 12 speed cassette on a 11 speed hub?

Yes you can run a 9/10/11 & 12 speed cassette on a shimano free hub, a Sunrace 12 speed will fit.

Are 12 speed chains interchangeable?

A Shimano 12-speed chain can work with a 12-speed SRAM chainring if the quick-link is replaced with a SRAM or KMC one. The downside of this approach is that the drivetrain will be louder and wear out faster as there’s extra contact between the teeth of the chainring and the inner plates of the chain.